You're using a beta version of our new web site.

Canon GL-2 Sound

Home Forums Cameras and Camcorders Consumer Camcorders Canon GL-2 Sound

This topic contains 1 reply, has 4 voices, and was last updated by  Anonymous 5 months, 4 weeks ago.

  • Author
    Posts
  • #48455

    Anonymous

    Hi everyone! I have a question, whenever I plug an xlr mic into my Canon MA-300, which is attached to my Canon GL-2. I get only one channel of audio. The same thing happens when I plug my Zoom H2 (via line out) to my GL-2. Is this the norm or am I doing something wrong. I have scoured the GL-2 Manual and cant seem to get a good answer.

  • #199090

    Anonymous

    I had a XM2 which I believe is a PAL equivalent of the GL-2. The external mic socket requires a 1/8 stereo plug to be plugged into it with the ring and tip being the “hot” and the sleeve the cold or shield. If you plug a 1/8 mono plug into it you will only record on the left channel. If you change the plug on your external device to a stereo plug you need to common up the tip and ring connections.

    Cheers Ian

  • #199091

    Anonymous

    Hi RC,

    I still hang on to my GL2 and still love it even though I haven’t used it much in a few years. On the XLR adapter you will have a left and right channel. You can go to a XLR splitter cable like this onehttp://www.bhphotovideo.com/bnh/controller/home?O=&sku=92972&Q=&is=REG&A=details

    and fill both channels or you will just have the one channel on tape. In post you just fill for the other channel when using the adapter.

    Can’t say about the H2, I use a H4n a lot but you might look at the cable or output for that.

  • #199092

    Anonymous

    I use the DXA-2S with the GL2. I changed the setting on it until I got a stereo feed on both channels. It records perfectly. Good luck. P.S. I don’t have a Zoom H2.

You must be logged in to reply to this topic.